CRT rebuilding equip on eBay! - Videokarma.org TV - Video

kx250rider · #1 01-01-2007, 10:53 PM

I saw this ad for some CRT rebuilding equipment from an estate... Says never used, looks like truth!

Includes what looks to be a gun placement lathe cabinet, and a BIG vacuum pump. I don't see any oven, but this could be a one-piece lathe and oven. No idea.

I do see a box of guns!

http://cgi.ebay.com/PICTURE-TUBE-REB...QQcmdZViewItem

He'll never get that price, but when he finds that out, he might go WAY down. I say $500 for the lot.

Charles

bgadow · #2 01-02-2007, 12:14 PM

Ha! I was just leafing through some old magazine articles (long story short, a technician cut-out, saved & categorized articles from Electronics Technician & other publications) and I spotted an ad for the company that made it, as well as another company with a similiar machine. I guess there had to have been a bunch of these in service throughout the country. Were they any good, really? I would think the training would be the big thing. The one ad said they would come set it up and show you how to use it. A big selling point in the ads was how little space it would take up.

Phil Nelson · #3 01-02-2007, 01:13 PM

Looks like great project material for the ETF museum :-)

I have only a general idea of what's involved in rebuilding a CRT. How many additional gadgets & supplies would you need to actually use this?

Phil Nelson

Sandy G · #4 01-02-2007, 01:16 PM

Hey ! I'm a-gonna git it & start goin into th' bidness of re-makin them there now ol' CT-100 Pitchur Toobs ! Y'all load 'em up, & send 'em all in now, y'hear ?

fujifrontier · #5 01-02-2007, 06:36 PM

sounds like a fishy plan

Steve McVoy · #6 01-02-2007, 07:31 PM

This was on Ebay earlier with a minimum bid of about $7000.

The problem with these things is the amount of time and experience it takes to do successful rebuilds. I don't have the time to learn how. Otherwise we'd try to get it for the museum.

Whirled One · #7 01-02-2007, 07:51 PM

Quote:

Originally Posted by bgadow

Ha! I was just leafing through some old magazine articles (long story short, a technician cut-out, saved & categorized articles from Electronics Technician & other publications) and I spotted an ad for the company that made it, as well as another company with a similiar machine. I guess there had to have been a bunch of these in service throughout the country. Were they any good, really? I would think the training would be the big thing. The one ad said they would come set it up and show you how to use it. A big selling point in the ads was how little space it would take up.

Wow! Y'know, I was flipping through some old magazines a couple weeks ago and I bet I saw the same ad you did (not the machine in that eBay auction; the one made by a different company), and wondered the same thing..! ...and I wondered if there might be some old TV repair shops out there that actually bought one of those machines and still had it standing idle in a corner someplace. I think it was supposed to take up 4x8 feet of floor space, though. Now I'll have to dig up one of the issues of that magazine (I think it was _PF Reporter_ magazine -- I got a whole *bunch* of those things a few months ago) and check. I agree that the training would probably be the big thing..!

bgadow · #8 02-02-2007, 11:59 AM

I was over to the antiqueradios forums and saw the thread over there...here is a link

http://antiqueradios.com/forums/viewtopic.php?t=66550

There is some very good information on picture tube rebuilding which I had not read anywhere before.

oldeurope · #9 02-04-2007, 04:37 AM

Thanks for this interesting link,
my tube regunner made a big secret around this.

Kind regards,
Darius