Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Antique Radio

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #9  
Old 01-20-2008, 08:26 PM
YamahaFreak's Avatar
YamahaFreak YamahaFreak is offline
<-- CSXT 6038, EMD GP40-2
 
Join Date: Dec 2005
Location: TOO sunny Florida, USA
Posts: 580
Quote:
Originally Posted by Jeffhs View Post
I think you have the type numbers of the two batteries transposed. Ninety volts is far too much for the filament supply, and the radio could not possibly work with only 7.5 volts B+ on the plates of the tubes.

BTW: I have heard of schemes such as you mention (connecting nine or ten nine-volt transistor batteries in series) to replace a 90-volt B battery in old tube-powered battery/AC portable radios when the normal 90- or 67.5-volt pack is unavailable. The improvised 90-volt battery will last quite a while, as the tubes in these old battery portables didn't draw much plate current. However, I wouldn't use anything other than alkaline batteries (nothing smaller than D cells) to replace the A (filament supply) battery, as the filaments in all the old 1- and 3-volt battery-radio tubes drew an awful lot of current; so much, in fact, that a four-tube battery radio (for example) would eat up a set of carbon-zinc batteries in a matter of minutes.
You are probably right. I wasn't looking very closely.
__________________
Sony Trinitron Fan
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:35 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.