Quote:
Originally Posted by marty59
This may sound silly but just to be sure...Are the Tuning Capacitor blades straight and parallel to each other?
The reason I bring this up is that I have an Emerson AC-149 that had been messed up by some hacker before me and the oscillator would drop out. Sure enough, the outermost blade was bent outwards to affect it. I "carefully" straightned it parallel with the others and problem solved.
So, even though there were no "shorts" the spacing was affecting proper operation!
|
Bending the outer blade is a proper technique for adjusting the tracking for many radios. It sounds like it may not have been done properly on your Emerson by the previous person.
John
06-01-2009, 11:10 AM
Threaded Mode