Ready to begin on my roundie

[Chad Hauris]

If you can find a junk TV with a coil for horizontal hold, that makes a really good durable adjustment tool for convergence circuit coils. I use one salvaged from a Sampo b/w tv. If there is still a piece of the core inside the convergence coil this may be enough to work if you use the hex head tool to turn it...if it is totally destroyed just salvage another ferrite core from a junk coil.

Once you degauss the set you usually don't need to re-degauss it unless it is moved...radio shack bulk tape eraser works good.

[mbates14]

The core is still in there, but when you try to turn it, it seized and it will start to chip some more. it was turning, but I think I turned it a tad too far.