|
|
|
#4
10-04-2009, 08:12 PM
|
||||
|
||||
|
Have you checked the B+ circuits in the set? An open input filter capacitor would yield low B+ and the symptoms (Low/No Vert sweep, 120Hz hum in audio) you describe would be the result. The input filter cap is going to be a two or more section can capacitor, usually rated at more than 350V.
I'd start by measuring the B+ feed to the vertical circuit, and trace it back to the power supply if it is low. Cheers,
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! 
|
|
|
Threaded Mode