My 1st Predicta

[DaveWM]

got it all back together, looks great, a little sync buzz that is some what tuneable. I prob should have checked the alignment curve while it was out but I just wanted to get it back togehter. I picked up some new feet for it, the orig were long gone. I could not get the anode back on, no way, so I decided to pop the shell off. Wow, what a pita... no problem getting it off but putting the retaining spring back on almost got the best of me.

At least while it was off I cleaned the CRT face and the back side of the plastic mask. Lotsa brown gunk came off the CRT screen.

Anybody have exp with polishing up plastic? this has some fine scratches that make it less than perfectly clear.

Overall it has a very decent pic, good lineairity, interlace, and focus. The CRT is a little brighter on the bottom 1/3 so dark scenes are more grey toward the bottom. Also if bold bright print is on the screen the horz before and after the print is darker.