|
had to clip out the .001 1kv disc to test, tested fine for cap, maybe a little low value, no leakage at 450v (as high as I can go), replace it with a .001 1kv just to be sure. Still can't get the PP any higher at the plate of the horz discharge. getting tired. I will check the HOT current tomorrow, will also try swapping out some other 6U10's to see if that makes any diff. Over all the pic is looking good, have not touched purity or convergence, but could watch it the way it is. Still need to check the remaing can caps.
|
02-11-2011, 08:24 PM
Threaded Mode