Prototype set is here

[Pete Deksnis]

Originally Posted by MelodyMaster

But it appears that the set has been used over the years http://www.videokarma.org/showpost.p...8&postcount=24 So it was either built as 3.579 quadrature, or has been modified to be NTSC-compatible.

I use the popular version of Occam's Razor: Don't allow an unproven variable to screw up a comfortable conclusion.

As Steve McVoy indicated, there are competing reasons for a post-1952 tube to be in this set. Also, as been stated earlier in this thread, there is not a scintilla of visible evidence that the CRT socket had 4-or-so kV on the convergence element (pin 13) for an extended period.

Still, there are no final conclusions. Perhaps this chassis will turn out to be from Hazeltine Corp.; they were located in the same general area as RCA Labs and where Harry Poster now has his business.

The quest goes on...

Pete