goes out of focus

[timmy]

tried the 12by7 and no change. i had used a fluke dvm and that voltage is what i got so if its going to be 5kv then i would have burned the meter out. i just dont understand what is going on here it was fine befor the multi caps. white screens were worse now its all screens as it has gotten worse.the 700 volts were from the 2 wires of the focus coil . also tried another 1v2 ans 2av2 no luck. i also put a fuse between pin 3-6 of the 6dq5 to ground. maybe the fuse has to much resistance, its half amp 250v.