|
|
|
#4
06-06-2012, 02:04 PM
|
|||
|
|||
|
yes checked the caps they look good but haven't cap tested them . i have fixed lots with new caps ..i am thinking if its not the inverter it could be a problem on the main board as that's what's switches the lights on . i need to know what voltage to expect on the pins that switch the inverter on .
all fuses test good including 0 ohm resistors .all diodes test good . i could just buy a new inverter board to see if it fixes it but i would be stuck with it if it wasn't the problem 
|
|
|
Threaded Mode