silvertone roundie

[timmy]

well later today i will be checking the crt with the bk440 crt tester on the cutoff mode and raise it up full and hope i dont get the blue glow. with the set on and working i didnt see any purple glow or anything glowing just the filiments but maybe this test will put this thread to rest on this set, if i get the blue glow. i do remember pulling the 6bk4 cap off and checking hv and it was around 24kv but when i pulled the crt plug off the hv went out the roof at over 30kv, and this was with the 6bk4 cap still off so either something in the circuit is holding back the hv or it may be the crt, who knows.