|
|
|
#16
12-20-2012, 08:15 PM
|
|||
|
|||
|
I have been able use 5 min epoxy to fix those, it best to let the epoxy start to setup, and you need to have everything out in the open. Just a little bit will do the trick, and run the screw in and out as it completley sets up. You have to work fast as the working time of 5 min goes fast once it starts to kick off. If you do it too soon it becomes a royal mess, too late and it will not give you enough time to get it positioned correctly.
|
|
|
Threaded Mode