RCA GMR648P Info?

[OIB1981]

Cool I'll stop by the shack and see if they have a 33uf 250 volt or higher. Don't want to place another order with Mouser.

[Gunslinger]

did you ever find the resistor value? I have sche3matics and can look it up tomorrow.

[OIB1981]

Nah I never did. I kinda just figured it was around 50 ohms and was just gonna put it back. If you'd look it up that be great.

[OIB1981]

Got the TV all capped up today. From a cold start it twitches in and out until it gets warmed up. Does it horizontally. Anybody got a clue what I might look into?

[Penthode]

Originally Posted by OIB1981

Anybody know the Value of this Resistor? Found it on the neck board R16. PCB looked pretty burnt so figured I better check it. Bands are really hard to read.
Just hard to read those bands. Thanks.

It looks like orange white black gold to me. That makes it 39 ohms at 5% tolerance. If it reads 50 ohms that would tend to clinch it.

[OIB1981]

Thanks I'll get that part next time I make a order.

[OIB1981]

found a pretty useful trouble shooting guide here for this chassis.

http://www.eserviceinfo.com/download...CA_CTC130.html

[ctc17]

Why would you recap such a new tv? If its not working right good chance a blind blanket recap wont fix it. Not spending the money for the service data yet replacing a bunch of caps that are good is INSANE!

[Gunslinger]

R5016 is 47 ohm 1/2 watt

[OIB1981]

Thanks for the value on the resistor.

I used a cap checker on all the caps. I only replaced the one's that were way out of range.