Rca ctc-5

[Steve D.]

Originally Posted by DaveWM

I was not able to get the bezel out of the way, I can get the top out (the 3 spring clips that hold it in) and the side are not retained but the bottom is not budging. I looked at an old bezel that was loose and I see two holes that I assume fit over pegs on the bottom but can not say for sure.

Wingate owners please comment on how to remove.

Dave,

Remove the pencil box knobs. Remove the pencil box. This wll reveal, at the top of the opening, two spring loaded metal inserts that hold the bottom of the bezel in place. Take a small flat blade screwdriver and place into the insert and push down. You can do one at a time. This will release the insert from the bezel. Reverse the process when replacing the bezel.

-Steve D.