Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Transistor Radio

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 02-11-2013, 12:46 AM
radiotvnut's Avatar
radiotvnut radiotvnut is offline
VideoKarma Member
 
Join Date: Jul 2007
Location: Meridian, MS
Posts: 6,025
Circa '62 Arvin 8-transistor radio

Today, I picked up this circa '62 Arvin model 61R58 8-transistor AM portable radio at the flea market. Over the years, I've had a few of these; but, they were all very beat up and/or missing parts. I've actually been looking at this radio for 2-3 months; but, didn't want to hand over the $20. I figured after a few months, I could get it cheaper; but, nope, he's one of those vendors who left instructions that the prices are marked, non-negotiable, and don't waste my time or yours calling me to ask if I'll come down. The radio actually has batteries in it and works; so, I broke down and bought it. I figure the owner used ebay as a price guide because most of these that I saw on that site go for $12-$15 and by the time shipping is added, that brings the price up to the $20-$25 range.

Anyway, this radio actually uses eight transistors in real circuit stages, unlike some models that used transistors as diodes and/or "dud" transistors that were not connected. This set uses a decent sized ferrite rod antenna, an RF stage, and two stages of IF amplification; so, it should be a good radio. Evern though it works, I can tell that the alignment is a little off and it could probably use some new capacitors.





Reply With Quote
  #2  
Old 02-11-2013, 05:45 PM
dieseljeep dieseljeep is offline
VideoKarma Member
 
Join Date: Jul 2010
Posts: 7,562
Interesting circuitry, transformerless output stage and large size batteries, for operating economy.
They must have built that model for a few years. The volume control code date is 1964, 33rd week.
Reply With Quote
  #3  
Old 02-13-2013, 05:21 AM
catman's Avatar
catman catman is offline
catman
 
Join Date: Jun 2008
Location: Queensland, Australia.
Posts: 74
G'day all, 'spaced' turns on the ferrite rod are an elegant touch, maximising coil 'Q', a definte sign of care in design and construction. Regards, Felix (vk4fuq) aka catman.
Reply With Quote
  #4  
Old 02-16-2013, 03:17 AM
JBL GUY JBL GUY is offline
VideoKarma Member
 
Join Date: May 2009
Posts: 138
Felix, congratulations on you new to you radio. Did you notice the bipolar power supply?

Thanks for the pictures.
Reply With Quote
  #5  
Old 02-16-2013, 04:07 AM
catman's Avatar
catman catman is offline
catman
 
Join Date: Jun 2008
Location: Queensland, Australia.
Posts: 74
G'day mate, I'm not sure what you mean. I'm confused! Regards, Felix aka catman.
Reply With Quote
Audiokarma
  #6  
Old 02-16-2013, 04:19 AM
JBL GUY JBL GUY is offline
VideoKarma Member
 
Join Date: May 2009
Posts: 138
Felix,

Take a look at the battery in the schematic. Notice that it is "center tapped" to provide the proper polarity voltage to the output transistors (both are PNP).

Not totally unusual for radios of that vintage.

It is a very nice radio and should be a great performer.
Reply With Quote
  #7  
Old 02-16-2013, 05:13 AM
catman's Avatar
catman catman is offline
catman
 
Join Date: Jun 2008
Location: Queensland, Australia.
Posts: 74
G'day mate, oh yes, you're right. Most interesting indeed! Regards, Felix aka catman.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 03:04 PM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.