|
|
|
#1
07-05-2013, 05:13 PM
|
||||
|
||||
|
Cleaning Pots
So I'm sure you've seen my other thread about my new Avanti. Well I'm getting into some misc stuff and thought a new thread might be better than cluttering up the main one. If this isn't a better approach, let me know and I'll keep it all in one.
I removed the color, tint and volume pots (all one assembly) and am going to deoxit and faderlube them. I have a question, though. The color and tint are actually two pots and the shafts have a hole that a small driver goes into and adjusts the second pot. What is the second pot for? If I clean them I need to turn them back and forth a number of times to clean and do the same when I use the faderlube. Should I note the position of the second pot and put it back in that position. Even if I do, the cleaning might change the resistance once the dirt is gone. If that happens, how do I go about setting those two? I'm attaching a pic. Thanks!
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 
|
|
#2
07-05-2013, 05:26 PM
|
||||
|
||||
|
I think I might have my own answer, but need to verify. I think the second pot is used for the preset colors for the Chromatic function? If so, then there probably isn't any reason to worry about the settings as I'll used a calibration DVD to set all the levels and such.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|
|
#3
07-05-2013, 07:09 PM
|
||||
|
||||
|
Quote:
Brite, contrast, color & tint all have em.......... 73 Zeno 
|
 |
|
|
Linear Mode
