Quote:
Originally Posted by jr_tech
Yes, it appears that the G1s are tied to a fixed voltage and the cathodes are driven by the 3 color video signals. The only controls that you have for cutoff are the G2 pots. Did you ever test the crt? were the cutoff voltages ok?
jr
|
Yes, I used a B&K 467 and the CRT tested good on all tests.
See my other post (the one with 5 pages). I found that removing the color taps from their connections allowed me to get the setup line. I don't want to adjust the G2s based on this as reconnecting the taps would just throw it off (probably worse than before).
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL
Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650
|
10-15-2013, 12:36 PM
Threaded Mode