Quote:
Originally Posted by bandersen
I'm not sure what to do about this resistor. It's R268 and is in series with the 6BG6 HOT grid. The schematic and parts list show 100 ohms but this is a 47 and appears to be original. When I measure it, I get 98 ohms.
It seems to me that if it really is twice what it should be, it could reduce the 6BG6 drive and flyback output. Should I leave it alone since it's close to the 100 specified in the service info, or replace it with a new 47 ?
 |
I would change the resistor! It already changed value and will progressively get worse.
I see some Allen-Bradley five percent resistors used.
11-12-2013, 09:42 AM
Threaded Mode