|
|
|
#1
05-31-2014, 08:23 AM
|
||||
|
||||
|
space command help needed
So my 1960 zenith space command comes on and works just fine for about 5 minutes then POP in speaker and a large squelching noise. The picture is all bent squiggly and with about 6 lines in it it almost looks like a circle. no actual picture.
__________________
 Looking for zenith cobramatic parts -johnny the raster master! 
|
|
#2
05-31-2014, 05:21 PM
|
||||
|
||||
|
Interesting..... Start the set with normal pix. Lightly tap on
the hoz osc, output & damper tubes & see if you can make it act up. It may also be the yoke shorting. After it craps out run for a short time < 1 mn, unplug & look for smoke or bad smells. The nose knows............... Beyond that it could be a lot of other things. If you can put up a picture & give the model & chassis number that will help. 73 Zeno
|
|
#3
05-31-2014, 10:04 PM
|
|||
|
|||
|
Hi John if the horizontal tube is bad let me know so I can find you another for nothing that means for free contact me directly not threw facebook call me or pm threw v.k. thank you....Timothy
|
|
#4
06-03-2014, 04:33 AM
|
||||
|
||||
|
Off topic, but I scrapped a mint condition set like that and if you need any of the remote control parts or other chassis parts you can PM me.
__________________
"Face piles of trials with smiles, for it riles them to believe that you perceive the web they weave, and keep on thinking free"
|
 |
|
|
Linear Mode
