ctc12 clone beam current

[timmy]

yes i agree that one measured 10.5 next up higher little less ohms and yes lug 2 of the f coil.

[Username1]

Hey !

You other 15 people watchin' ! Yah you !

We doin the right thing here ! ! ???

Any of ya got pictures of these connections yer willing to put up....?
.

[timmy]

[DaveWM]

ok so you have the blue lead from the yoke and the #1 of the focus coil to the 11.5 fly lug

the 10.5 fly lug is connected to the #2 of the focus coil. Nothing else is on the 10.5 fly lug correct?

is that correct?

[timmy]

hey squirrel boy what part of orange county are from?

[timmy]

Originally Posted by DaveWM

ok so you have the blue lead from the yoke and the #1 of the focus coil to the 11.5 fly lug

the 10.5 fly lug is connected to the #2 of the focus coil. Nothing else is on the 10.5 fly lug correct?

is that correct?

#2 f coil was on the lug that tested 11.5 ohms nothing else on that one

[Username1]

Pine Bush / Montgomery.
2 minor specs on the map..

.

[timmy]

Originally Posted by Username1

Pine Bush / Montgomery.
2 minor specs on the map..

.

oh ok my son goes to school in pinebush. i am there in pinebush 4 times a week.

[Username1]

I'm sorry.......... You should get him out before any real damage is done....

.

[DaveWM]

Originally Posted by timmy

#2 f coil was on the lug that tested 11.5 ohms nothing else on that one

ok that was wrong. Do you now understand what to do?

per the schematic with the now correct understanding of which is the correct lugs of the fly?

[timmy]

yes i think so here goes, the lead that is supposed to be the boost and the blue wire from the yoke i have to put it on the other leg that measures 11.5 and then wire the f coil the right way, which would be just reversing 2 connections on the f coil, am i correct ?

[timmy]

Originally Posted by Username1

I'm sorry.......... You should get him out before any real damage is done....

.

well hes only in 2nd grade ,lol,

[DaveWM]

you have to look at it, I am not there so I do not know, just wire it according to the schematic now that you know the correct lug PER the schmatic. But I would guess yes you need to reverse the focus 1 and 2 since you orig had the fly wired backwards.

[timmy]

well i have to take a break i need to bring my son to his mom in PINEBUSH.......

[timmy]

Originally Posted by DaveWM

you have to look at it, I am not there so I do not know, just wire it according to the schematic now that you know the correct lug PER the schmatic. But I would guess yes you need to reverse the focus 1 and 2 since you orig had the fly wired backwards.

so you still suggest using the 11.5 for the blue wire thing? what was wired wrong was the heater connections on the 1v2 originally when i found that mix up in the focus circuit