|
|
|
#16
04-06-2015, 01:03 PM
|
||||
|
||||
|
Well I've got the focus problem figured out. The focus coil needs to be adjusted beyond what the mount will allow. I guess the 10FP4 and it's straight gun is just different enough that it needs a different angle on the focus coil. I'll modify the mounting holes so I can position the coil where it needs to be with the 10FP4. I'll have to hold off until the chassis is back in the cabinet as the CRT will be in a different position than my temporary out of cabinet support.
Now to tackle the next problem, the ghosting. Does anyone have any thoughts on what could be causing it? *Edit I haven't yet tried the tubes in the IF and video sections yet so I'm going to start there and see if that is the culprit of the ghosting.
__________________
John Last edited by vts1134; 04-06-2015 at 01:20 PM. 
|
|
|
Threaded Mode