RCA 721TS Help

[Radiotronman]

I started restoring my RCA 721TS and I'm not getting a raster on my screen. I've recapped the set, including all of the electrolytics. I have proper high voltage at the second anode (9000v) but my voltages at the crt socket aren't even close. Below is what I have:

Pin 1 -16.10 (should be 140V)
Pin 2 -25.4 (should be 75V)
Pin 10 377 (should be 290V)
Pin 11 62.6V (should be 220V)
Pin 12 -16.25V (should be 140V)

What am I missing here? Any help would be appreciated as this set is in nice condition and I'd love to have it as my daily watcher as I begin other sets!!

Thanks!