|
|
|
|
|
#1
01-29-2016, 09:13 PM
|
||||
|
||||
|
Your meter sucks. This is why I always just read milivolts across a 1 ohm resistor inserted from the cathode pin to ground or wherever, takes the guesswork out. Most of my sets have one permanently installed, in a spot where I don't have to remove the chassis to get at it.
__________________
Evolution... 
|
|
#2
01-29-2016, 10:20 PM
|
||||
|
||||
|
Holding at 230ma. Went to adjust it and the slug is frozen in the coil. How do I free it up without removing the chassis from the cabinet?
__________________
 Admiral C322C2 Regent (Restoring) RCA CTC-7 Pensbury (Restored) RCA CTC-5 Westcott (Restored) CRA CTC--4 Director 21 (Restoring)
|
|
#3
01-29-2016, 11:16 PM
|
|||
|
|||
|
If 230 ma. is a correct reading it's gonna cook the H.out tube in short order.
 It ain't too easy on the flyback either.
|
 |
|
|
Hybrid Mode
