|
|
|
#9
03-20-2016, 01:39 PM
|
||||
|
||||
|
The shaft had about 1mm of free rotational movement. Using the big pliers I got the shaft to move vertically (not rotation), then with little effort got it turning again. Applied the meter and confirmed that it was, indeed, 1.2K to 0 ohms. Put it back together and it worked for a few tries, then locked up again. I'll spend some time trying to resolve that. If I can't fix it, I'll go to plan B.
Thanks much.
__________________
Winky Dink Damn the patina, Full speed ahead! 
|
|
|
Threaded Mode