Signal issue on a Motorola 7VT2?

[Kamakiri]

Everything's lighting, and I have a full raster. No audio, no picture. It appears that someone at some point had their hands in this section extensively, a few changed resistors, and the screws on the pots are obviously not in their original positions. As well, there's pencil labeling showing what each does.

I made a mistake when I said the "overload on V2". To clarify:

On pin 3 of V1, I have nothing. Should be 52 VAC.

On pin 1 of V2, I have 180 VDC. Should be 107 VDC.