|
|
|
#12
05-14-2016, 06:58 PM
|
||||
|
||||
|
Checked all of the resistors and replaced the ones out of tolerance. Still have to order a 2.2meg replacement for one of them at 1 watt, I'm out. I cleaned the dirty pcb board and replaced as many of the caps as I had on hand. There's a couple newer replacements, but they were tacked on so I'll replace them with new ones and solder them correctly on the board. My flyback is in the mail to replaced the old one that is bad.
|
|
|
Threaded Mode