|
Took some voltage readings: 5v standby is present, hooked up to the 12v tap and tried a power up, voltage jumps up then drops, so its safe to assume the power supply is trying to come up but shuts back down. So dr.ido's guess is looking valid..
Ebay sells repair kits for this board, most seem to focus on the 2 caps near the connectors.. Are the mfd ratings that critical for these boards? I may have some good ones from some salvaged receivers exept the voltage ratings may be higher I dont have the ESR meter to check the current ones, may need to do some cap swapping since a no bulge cap can still be bad... Any ideas?
Your input is most appreciated..
SR
|
07-06-2016, 02:41 AM
Threaded Mode