|
|
|
#10
01-18-2017, 10:54 PM
|
||||
|
||||
|
Was the fuse replaced with a slow blow fuse? The slow blow will much better handle the surge and is recommended for most sets. Also reducing the rating below 0.25A especially if non-slow blow is asking for it to blow on switch on.
To better troubleshoot, I would suggest temporarily putting in a 0.5A, let is run and quickly investigate what is wrong. My guess is likely the slow blow 0.25A will fix it. 
|
| Audiokarma |
|
|
Threaded Mode