|
Ah yes, easy one-handed operation.
I'd like to add that it is important to use an *oversize* coil as Tom instructed. A while back I used a coil from a 19" set that was only big enough to surround the CRT as it was all I had. Even at a lowered line voltage, it pegged the meter on my Powerite and got too hot to hold in about 10 seconds. It's a wonder it didn't trip the breaker.
By the way, I've heard of using a 100-watt light bulb in series with the coil as a current limiter.
Last edited by Jon A.; 05-10-2017 at 04:35 PM.
|
03-23-2017, 04:34 PM
Threaded Mode