|
|
|
#10
05-04-2017, 06:35 PM
|
||||
|
||||
|
Give us a photo of the antenna as mounted inside the back - I've got a lot of rods, but will need to know how the ball is mounted - clamp, v-pinch, or riveted.
As to the UHF tuner, is it a clutch style or gearbox (whitish round assembly in line with the shaft at the front of the tuner)? A pix would also help. ES85 or EP85-something tuner - all the solid state GE UHF tuners are non-serviceable, but the mechanicals can be transplanted. I'll pull the Sams if I have it and see what the part number is for the UHF knob - I have a bunch of older GE Utica/Syracuse knobs - what plant is mentioned on the back, possibly molded in the neck bell on the back? Any parts I have are yours for postage only - I have no use for most of them.
__________________
Brian USN RET 22YRS (Avionics/Cal) CET-Consumer Repair and Avionics ('88) "Capacitor Cosmetologist since '79" When fuses go to work, they quit! Last edited by Findm-Keepm; 05-04-2017 at 06:49 PM. Reason: 85 vs 76 - correction 
|
| Audiokarma |
|
|
Threaded Mode