Philco Seventeener II - Videokarma.org TV - Video - Vintage Television & Radio Forums

		Videokarma.org TV - Video - Vintage Television & Radio Forums > Early B&W and Projection TV
Philco Seventeener II

Notices

Time to get this site upgraded, so we are passing the hat around. We appreciate any donations. Seriously, even a dollar helps. The payment page may be found here - https://www.audiokarma.org/support.html


	We appreciate your help in keeping this site going.

Thread Tools

Display Modes

#10

06-27-2017, 02:22 PM

Crist Rigott Crist Rigott is offline

VideoKarma Member

Join Date: Oct 2015

Location: Waxahachie, TX

Posts: 1,519

Another question. The fusistor is 5.6 ohms. I'm going to replace it with a resistor and a separate fuse. The parts list doesn't show what the wattage rating is. I did an Ohm's Law calculation based on 120W and came up with a 5.6 ohm 5.6W resistor. I'm going with a 10W wirewound enamel resistor. Do my calcs seem reasonable and a 10W seem right? I'll go with probably a 2 1/2 amp fuse.

Audiokarma

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads You may not post replies You may not post attachments You may not edit your posts BB code is On Smilies are On [IMG] code is On HTML code is Off Forum Rules

Forum Jump

All times are GMT -5. The time now is 04:36 AM.