|
|
|
#9
11-28-2017, 08:23 PM
|
|||
|
|||
|
The resistance check so no errors.
I then powered it up with the rectifier tubes out. The filaments all glowed nicely. Then rectifier tubes in and I got B+ voltages. The high B+ reads 328V vs 360V and the lower B+ reads 186V vs 130v.  I have 11.5Kv and the picture looks washed out. All I've done so far is adjust the front controls. V Lin, V Size, Bright, Contrast, H Hold, V Hold, and the Buzz control on the back.  https://youtu.be/1U6SL5BV6-Y Any idea as to where to start? BTW, the test CRT is an 8YP4 with the adapter harness. 
|
|
|
Threaded Mode