Packard Bell 17VT1

[dieseljeep]

Originally Posted by Winky Dink

Below is a photo of the wiring of one of the 'lytics. It appears to be factory-wired, but I can't reconcile it with the Sams schematic, parts list, and the info stamped on the can.



So, please tell me that I'm reading it wrong or, if the schematic and the wiring disagree, which I should do--follow the schematic or duplicate what's already there.

Thanks,
Henry.

The schematic is wrong!
The 6AS5 audio output tube is used a voltage divider as well. The voltages shown are way off. The voltage on the cathode should be at least 100 volts or more.
Just wire it the way you find it! It worked before!