Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Solid State CRT Televisions

Notices

We appreciate your help

in keeping this site going.
Reply
 
Thread Tools Display Modes
  #1  
Old 08-09-2018, 12:29 AM
Sealtest Sealtest is offline
VideoKarma Member
 
Join Date: Dec 2017
Location: Knoxville, Tennessee
Posts: 129
Quote:
Originally Posted by zeno View Post
Run for about 30 sec then unpower & feel the 2SD1555.
To hot to touch most likely bad FBT or rectifier off it.
If cool or a little warm turn up variac & see if things improve.
The amps sometimes fall as the AC volts go up.
Keep in mind the HOT can short again if not careful. My advantage
doing this was knowing what I could get away with !

73 Zeno
LFOD !
When I stop fighting with that trinitron project I'll try this.

I'm starting to wonder if something isn't getting enough power in the set. With the Samsung at 90vAC it looks like the trinitron screen at around 50ish volts. I'd suspect caps but they've all tested good so far. Dang TVs are a challenge compared to other electronics.
Reply With Quote
Reply



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 10:05 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.