Motorola TS-4J

[timmy]

There is a resistor at v1 it's a 1k with b+ at the one end, just from my troubles with my sets double check that resistors value because I have had that resistor bad and even burned up.

[Zsuttle]

Checked that, however I just realised that some of the caps that I installed in the horizontal are 500v mica caps when it calls for 2kv caps. That might explain a little of that. The two caps are C71 and C72 680pf and 900pf respectively. Do those need to be mica caps or can i use ceramic discs?