Hallicrafters T-506 Late Production Set

[Tom Albrecht]

Originally Posted by M3-SRT8

Another question: I hear the HV RF Coil is a soft spot on these TVs.

Should I:

1. Clean and bake it at 180 degrees?

2. Space the top lid by .25"

3. Add a muffin fan?

Love to see a pic of the HV Cage with the fan installed.

Thanks.

My experience with a Hallicrafters set that had a problematic coil was as follows:

1. Clean, bake, and coat with fresh varnish: Temporarily fixes the problem, but not long term. (although others have reported better results)

2. Lift the lid by 1/4 inch: not sufficient to help.

3. Add muffin fan and lift the lid: works well. I had a very small muffin fan that fit inside the cage. About 30 mm square, 10 mm or so thick. Didn't like the noise it made.

4. Best fix: replace the coil with a different one (I used a donor from a Teletone junker)

Not all Hallicrafters sets have this problem. You might be lucky and have one of the good ones.