Quote:
Originally Posted by trinescope
In that case I'm probably OK. The threaded rods are in fact weakly magnetic. I thought it had to have an actual magnet on the inner end.
|
If you have a bad screw magnet for a CT-100 or similar, there is an easy fix, which I used.
Just find a small ceramic magnet and break it into various size pieces. Set the
defective screw at a convenient spot, then try pieces at the OUTER end
of the screw until it more or less converges. Then glue it on, and screw the screw until its exactly right. Easy.
07-01-2019, 07:48 AM
Threaded Mode