Convergence Issue

[Yamamaya42]

Originally Posted by Electronic M

The CTC-5 is different from the CTC16. The CTC-5 has all the convergence circuits built into the main chassis and only the convergence yoke unplugs.
The CTC16 has the yoke hard wired to the convergence board which unplugs from the main chassis....Also IIRC the CTC16 remotely mounts a lytic that's important to the vertical on the convergence board for some reason.

the CTC-16/X and the GE-CTC-15 clone seem to be identical.

both having 2 windings off the Vert output feeding convergence.
https://i.imgur.com/cdZ4cg6.png

also both look the same,having 5 drop caps.
https://i.imgur.com/0H4QnUo.jpg
I can't explain why you lose sweep when you unplug it.
I just know that you do, for some weird reason :O