Videokarma.org

Go Back   Videokarma.org TV - Video - Vintage Television & Radio Forums > Early Color Television

Notices

We appreciate your help

in keeping this site going.
 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #11  
Old 02-19-2022, 06:38 PM
Jeffhs's Avatar
Jeffhs Jeffhs is offline
<----Zenith C845
 
Join Date: Feb 2003
Location: Fairport Harbor, Ohio (near Lake Erie)
Posts: 4,035
Quote:
Originally Posted by Eric H View Post
The Wild being a thrift store.

This Westinghouse HCK611 had just been dropped off when I arrived, it was on the floor and priced before I left, $37 later it was in the back of my truck.
Some poor Dog is going to sleep on the Couch tonight.

CRT checks excellent as far as I can tell, my testers are bit screwed up but between the two of them I determined it checks like new on emissions and tracking.

Powered up and made a picture even, but the filters are shot and there's a loud hum in the sound.
I'm surprised you aren't seeing hum bars in the picture as well as hearing hum in the audio, if the filter caps are that bad. I would replace them as soon as possible, as it seems they are on their last legs. Caps in this condition may be close to shorting as well, which could and probably will damage or destroy the power transformer if they don't cause the line fuse to blow first.

However, it sounds to me as if the CRT is in good shape, so if you correct the power supply problems the set should be OK. As I said, if you have severe hum in the sound, the capacitors are in very bad shape and will fail or short eventually. I wouldn't be the least bit surprised the filters are going bad if they are the originals, as the TV was made 58 years ago.
__________________
Jeff, WB8NHV

Collecting, restoring and enjoying vintage Zenith radios since 2002

Zenith. Gone, but not forgotten.
Reply With Quote
 



Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 04:53 AM.



Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
©Copyright 2012 VideoKarma.org, All rights reserved.