|
Got the back off. Not seeing any leaky or bulging caps. Right Tom trying to figure out the easiest way to get the D board out so I can flip it but the plastic it sits on doesn't want to slide out and I'm not seeing any clips. God I hate working on the big wega sets. I only worked on one other one several years ago to change out two ic chips because it was dead with blinking led codes. Got it running only to find that it had took a pretty good hit to the top left corner and the shadow mask had shifted. Anyway, here's some pics so far. I'm gonna try to get this out and stand it up to where I can see the bottom side so I can check. Can someone circle the area I should be looking at? My eyes are not very good and also I can't get the tray that the D board is mounted to slide out.
__________________
Genesis does what Nintendon't
Last edited by pac.attack76; 04-19-2024 at 09:18 AM.
|
02-18-2023, 02:45 PM
Threaded Mode