|
Yeah the RCA schematic for the 240 is drawn out differently than the Sams. The fuse is directly in line with the yoke and pin 6 on the 5V4 is on the other side. I also ohmed it out from the focus control. I got 13.5 and 15 ohms from multiple places and I doubt a reading that close to the actual value from 2 spots is a coincidence. But with my luck, it could be! I need to get into the HV cage and do a complete service. Haven’t done anything in there yet. Need to resolder and clean and check values.
|
08-01-2024, 08:51 AM
Threaded Mode