|
|
|
#14
01-09-2026, 10:23 AM
|
||||
|
||||
|
Since I just learned that multiple posts on same TV isn't the best approach, I'm going to post this here because it's the closest thread to my next question.
I was searching the internet for all the info I could find on my model (Avante SE2564X) and came across something from another forum (Zeno was helping them). In one of the pics posted, I noticed the routing of the convergence board wiring was routed much differently than mine. It got me thinking that maybe mine is wrong? I'll post the images and maybe someone will be able to chime in. Mine is tied together with a yellow tie. Not sure what it's called, but it seems to be a version before our standard zip ties. Maybe it was changed from factory routing. Anyway, let me know what you think.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 
|
|
|
Threaded Mode