|
|
|
#11
04-02-2026, 05:43 PM
|
||||
|
||||
|
Tried to pull C202 and 204 by heating up the bucket and pulling the leads out, but that only worked on one lead that was alone in the bucket. All the other leads were in one with multiple leads and I couldn't seem to get it hot enough as they all acted as heatsinks. So I cut the other leads.
I tested them and the 68pf tested as 56pf with an ESR of 21kohms and the .0047 tested as .0038 with an ESR of 411ohms. I tested them for value at 100Hz and ESR at 100kHz. That is correct? When the new ones arrive, I'll check them the same way.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 Last edited by TinCanAlley; 04-02-2026 at 06:00 PM. 
|
|
|
Threaded Mode