![]() |
|
#16
|
|||
|
|||
|
I cant figure out where any of these parts are, or how they are used in the circuit till I get sams.
|
|
#17
|
|||
|
|||
|
ok, I pulled the chassis, they made damn good use of circuit boards
![]() Anyway, I found one resistor 100ohms by the color bands, it reads 4.3k ohms on the h out tube. I found another stage, it has some unknown resistor connecting from a board off to the left, up to the deflection stage, I don tknow without sams, it is charred so bad, I cant see the color bands, as soon as I touched it, it fell apart. So, its bad. No idea what value, or where its used, no sams. Anyone? |
|
#18
|
||||
|
||||
|
Quote:
__________________
"Restoring a tube TV is like going to war. A color one is like a land war in Asia." |
|
#19
|
|||
|
|||
|
yea, but im not very good with cabnet work. Im excelent with electronics. not so good with cabinet.
|
|
#20
|
||||
|
||||
|
mbates can you get the kcs chassis number, it will help me find the sams.
|
| Audiokarma |
|
#21
|
|||
|
|||
|
its in the post. KCS104H
|
|
#22
|
|||
|
|||
|
I found the bad resistor, I replaced it, it jumped from 20 volts to about 235volts, but as soon as the tubes warmed, it dropped all the way down again, and burned the resistor. Bad cap syndrom most likely.
|
|
#23
|
|||
|
|||
|
I borrowed a DV cam with a picture ability. One is kind of hard to see, low light conditions, so I took most in nightshot. (infrared LEDs, b&W)...
|
![]() |
|
|