|
|
|
#1
07-17-2013, 10:15 PM
|
||||
|
||||
|
She's almost done
Well I managed to degauss, set purity, set grayscale and do most of the convergence. I'll need to go over the convergence some more as I can't for the life of me figure out why the right side is so bad compared to the rest of the screen. The red and green horizontals line up with each other with a slight bend upwards, but the blue is almost completely flat. I've tried all the controls to get them to converge, but any attempts at getting the blue to curve up a little causes the blue to go out in the center. Any attempts to make the red and green bend back down causes them to mess up in other places on the screen. It's pretty odd.
Over all, the image is much, much better. I'm attached a pic. The screen is kind of washed out from the flash, though.
__________________
Pioneer SX-1080, Pioneer PL-115D, Pioneer CT-F9191, Pioneer RG-1, Wollensak 8050A, Akai 4000DS MkII, Pioneer CS-05 & Polk 1.2TL Denon 5803A, Pioneer DVL-700, Pioneer CT-W603RS, Toshiba HD-A3, D-Link DSM-520, Dish VIP-722, Polk 1.2TL, CSi5, LS/fx, RT-800 and PSW-650 
|
 |
|
|
Linear Mode
