Ok. Let’s try this again…RCA 9TC240 Alignment

[Chris K]

Originally Posted by Yamamaya42

I'm getting confused just trying to follow all this.
As Penthode said, the -4.5 is set and forget, set at the start, and don't touch, or it will throw all things off, it's meant to suppress some circuits while you do the alignment, you do not need to monitor it.

Hey...me too! I got it about the "set and forget it" -4.5 volts. I'm not sure how Penthode would like to go forward. These settings are critical to the quality of everything going forward and I've gotta get it right. Maybe I'll post what's going on with pictures of each step and look for input from everyone and a consensus all is good before I go on to the next trap adjustment.

I've ordered some mini alligator clips so I can solder up 4-5 330 ohm, easy on/easy off shunts for the transformers in the last 2 steps in the alignment table.