Mighty Monarch of The Air

[vts1134]

The reason I asked is I thought I would check back through the tubes to make sure I didn't mix some of them up when I reinstalled all of them. I noticed two things. V10 is a 6AT6 on the schematic and I have a 6AV6 installed. I mentioned this before and was told it was ok but thought I would mention it again. V15 (the horizontal output) on the schematic is a 6AV5GT and I have a 6AV6GA installed. Are these interchangeable or is this no good? Also I replaced C40 with a .022mf cap because that is what the capacitor list called for, but the alternate schematic (which is actually what I have) calls for a .002. Is .022 too much for a replacement? If the horizontal tube isn't the whole problem in a nutshell (I'm sure it's not, that would be too easy), I think I'll look back through the set and make sure I didn't replace other caps with the wrong capacitance because of the parts list being different from my set.