![]() |
|
#13
|
||||
|
||||
|
OK, now I'm even more confused. I studied the Riders schematic more closely and my set is a combination of the TS-4 early and TS-4 late.
The TS-4 early has the big 0.03 mfd HV vertical caps and 6S8GT in the audio. The TS-4 late has 0.005 mfd HV vertical caps and 6AL5 + 6SQ7 in the audio. I have the big 0.03 mfd HV vertical caps and 6AL5 + 6SQ7 in the audio ! Also, thanks to your tips I was able to get the masking tape off ![]() Window cleaner with alcohol and ammonia did a good job on most of it. Then, alcohol on the residue. After that, Howard's RAF and Feed n' Wax. ![]() Not too shabby. Of course, all the dings, scratches and chips are still there, but it beats refinishing. ![]() Notice it doesn't have any side caps near the control panel ? That's another difference I just discovered. All the other VT71s I've seen had those caps that covers screws which hold on the front near the bottom like this. ![]() However, in the set, the control panel is held on from behind by screws. I think the earlier design is much nicer looking.
Last edited by bandersen; 07-14-2011 at 08:52 PM. |
|
|