ctc12 clone beam current

[timmy]

Originally Posted by DaveWM

It is NOT connected correctly IF you reversed the fly lugs. the two ELECTRICLY speaking bottom lugs connect to the focus coil (D and E on SB's photo).

You just have to figure out which lug is which between the schematic and the coil and connect it right ELECTRICLY.

i did this already but being this boost is said to be on the bottom goes against what im reading. so if i took the 2 from the fly and reversed them then that would be moving the boost wire to another internal tap of the fly and would leave the terminal in question on the f coil alone, right? it would then be using the 11.5 ohms.