|
|
|
#21
03-04-2015, 08:05 PM
|
|||
|
|||
|
After I panicked last night, I sat down an reread the instructions and figured it out, but thanks for the help.
Now I have a new issue. I've got the new yoke installed and did a power up. I have no Hi voltage. Checking voltages on the 6CG7 gives good readings on both plates, pin 6 and 1. I don't have any negative voltages on pins 2, 7, 8. High voltages probe shows nothing on CRT anode, plate of 12AV5, or pin e of Damper. 
|
|
|
Threaded Mode